Menu
Your Cart
Please ensure you select your currency before checkout, currency link is at right top of page when viewed on desktop or in the "USD" link in sub menu when viewed on phone

ATC250R 83-84

ATC250R 83-84

This section allows you to search for all parts relevant to Honda ATC250R 83-84 models.


ATC250R, 2nd generation Introduced 1983, ends 1984, Features:

  • Model Code for 83-84 models "964".
  • 5 speed manual clutch transmission.
  • low pressure tyres. (front) 23.5x8x11. (rear) 22x11x8.
  • Tyre pressure front 0.23 kg/cm2 (3.3 PSI ) 1900 mm dia.
  • Tyre pressure rear 0.17 kg/cm2 (2.4 PSI ) 1745 mm dia.
  • Front fork oil capacity 281cc.
  • Length 1840 mm, Width 1075 mm, Height 1075 mm, Weight 133kg.
  • Engine bore 70mm, Stroke 64.4mm. CR 6.7:1 Displacement 247cc.
  • Carb Keihin PE30A, main jet #130.
  • Engine number below clutch cover in front of gear shift shaft.
  • Frame number located on steering head stock left side.
  • Engine Oil capacity 1.1ltr.
  • Fuel tank capacity 10.5ltr.(8.7ltr main 1.8ltr Reserve).
  • CDI Ignition.
  • Plug gap 24-28 thou (0.6-0.7mm).
  • Plug NGK BR8ES.



Brand: ATC Heaven
Here is a nice universal Ignition coil, It works with either points or CDI ignition system, Works on Honda, Yamaha, Suzuki and Kawasaki.You may need to fabricate a mount bracket but apart from that its plug and play...
us$45.00
Seat Cover ATC250ES Grey 85-87
New Out Of Stock
This seat cover is for the 85-87 ATC250ES, made from quality vinyl it will replace your existing worn out or torn cover perfectly. Just glue or staple to the existing base for a perfect result.These covers are available in either Black or Grey, ..
us$49.00
Rear axle nut with flange. The axle nut is subject to abuse and damage and should be replaced as required.Hex type castle nut suits the following models:ATC250R 81-84ATC200X 83-85FL350 Odyssey '85..
us$8.80
Inline Fuel Filter Right Angle
New Hot
This fuel filter is a variation on our inline filter, has clear body so you can tell its working and features a right angle outlet. Great for fitting in tight spaces where a straight inline filter won't go...
us$4.15
Brand: ATC Heaven
This is the seal that fits in the rear of the axle bearing carrier and seals the carrier from dirt and other debris. If missing this can contribute to premature bearing failureSuits ATC250R 83-84SOLD PER EACH..
us$10.00
Brand: ATC Heaven
Here is a generic  Brake Master Cylinder, cylinder incorporates a brake light switch which will allow you to wire a functioning rear brake light.NOTE: This item is not Direct fit for ATC models but can be easily adapted.Can work on ATC200X, ATC250R ATC350X..
us$49.50
Brand: ATC Heaven
Here is a generic master Cylinder Reservoir, NOTE: This item is not Direct fit for ATC models but can be easily adapted.Can work on ATC200X, ATC250R ATC350X..
us$16.50
This clear inline fuel filter features a brass airstone type element rated at 75 micron, 50mm in length, 25mm diameter at largest point, takes 6mm fuel hose. Great item to keep rust scale and other elements out of your carb, just cut the fuel line and splice in...
us$4.15
Mono Shock Spanner
Out Of Stock
Brand: ATC Heaven
This tool is vital for adjusting pre-load on mono shocks, use anything else and you are just asking for trouble. Get the right tool and get it done properly the first time. Suits ATC200X, ATC250R and ATC350X..
us$35.00
Brand: ATC Heaven
Before you begin servicing the electrics on your ATC make sure you have one of these flywheel pullers. Can you believe that some people would use a hammer to try and loosen the flywheel. Try that and you are going to end up with an expensive repair bill. Get this tool and do the job right! Suits ATC..
us$25.50
Brand: ATC Heaven
Clymer Workshop manual, covers models ATC250R "Air Cooled: from 1981-1984. Contains service, repair and maintenance info along with wiring diagram. Covers ATC250R 81-84. "Honda Shop Manuals also available, please enquire"..
us$59.00
Brand: ATC Heaven
Get this universal headlight switch to replace your old broken switch or where retrofitting lights. This is a reproduction of switches fitted to Yamaha WR models but will work on just about any application. Some soldering and wiring knowledge required...
us$48.00
Showing 1 to 12 of 92 (8 Pages)