Your Cart

Please ensure you select your currency before checkout, currency link is at right top of page when viewed on desktop or in the "USD" link in sub menu when viewed on phone.

ATC250R 81-82

ATC250R 81-82

This section allows you to search for all parts relevant to Honda ATC250R 81-82 models.

ATC250R, first generation Introduced 1981, ends 1982, Features:

  • Model Code for 81-82 models "961".
  • 5 speed manual clutch transmission.
  • low pressure tyres. 22x11x8.
  • Tyre pressure front 0.15kg/m2 (2.2 PSI )1760 mm dia.
  • Tyre pressure rear 0.15 kg/m2 (2.2 PSI )1760 mm dia.
  • Front fork oil capacity 174cc.
  • Length 1795mm, Width 1075mm, Height 1040mm Weight 137kg.
  • Engine bore 70mm, Stroke 64.4mm. CR 6.6:1 Displacement 248cc.
  • Carb Keihin PE23A, main jet #158.
  • Engine number below clutch cover in front of gear shift shaft.
  • Frame number located on steering head stock left side.
  • Engine Oil capacity 1.1ltr.
  • Fuel tank capacity 8.4ltr.(6.5ltr main 1.9ltr Reserve).
  • CDI Ignition.
  • Plug gap 28-31 thou (0.7-0.8mm).
  • Plug NGK B8ES.

Brand: ATC Heaven
Axle nut spanner is great for removing large ATC axle nuts without damagehas 27mm and 42mm hex to suit most ATC models..
Cable Adjuster
New Out Of Stock
Brand: Wide Open
Anodised aluminium cable adjuster, suits most models with smaller 8mm cable. Alloy construction makes these light weight and resistant to corrosion. Great replacement for chewed out or rusted adjusters..
Brand: ATC Heaven
Here is a great item to repair or rebuild your existing wiring harness.Coloured cable comes in most popular styles, just pick your colour from drop down box. Cable is 13' long and rated at 14 amps, made in Japan just like your bike..
Seat Cover ATC250R Black 81-82
Out Of Stock
This seat cover is for the 81-82 ATC250R made from quality vinyl it will replace your existing worn out or torn cover perfectly. Just glue or staple to the existing base for a perfect result...
Brand: ATC Heaven
Here is a nice universal Ignition coil, It works with either points or CDI ignition system, Works on Honda, Yamaha, Suzuki and Kawasaki.You may need to fabricate a mount bracket but apart from that its plug and play...
Rear axle nut with flange. The axle nut is subject to abuse and damage and should be replaced as required.Hex type castle nut suits the following models:ATC250R 81-84ATC200X 83-85FL350 Odyssey '85..
This fuel filter is a variation on our inline filter, has clear body so you can tell its working and features a right angle outlet. Great for fitting in tight spaces where a straight inline filter won't go...
Front Brake Master Cyl   ATC200X  | ATC250R | ATC350X
Out Of Stock
Brand: ATC Heaven
Here is a generic  Brake Master Cylinder, cylinder incorporates a brake light switch which will allow you to wire a functioning rear brake light.NOTE: This item is not Direct fit for ATC models but can be easily adapted.Can work on ATC200X, ATC250R ATC350X..
Brand: ATC Heaven
Here is a generic master Cylinder Reservoir, NOTE: This item is not Direct fit for ATC models but can be easily adapted.Can work on ATC200X, ATC250R ATC350X..
Seat Foam/ Cover Set ATC250R 81-82
Out Of Stock
First Gen ATC250R models are getting a bit long in the tooth, therefore most parts are worn out by now. And seats are no exception, in fact this is probably the first item to bite the dust.Luckily we offer this premium seat foam and cover set that will restore your ride to original feel.Suits ATC250..
Inline Fuel Filter
Hot Out Of Stock
This clear inline fuel filter features a brass airstone type element rated at 75 micron, 50mm in length, 25mm diameter at largest point, takes 6mm fuel hose. Great item to keep rust scale and other elements out of your carb, just cut the fuel line and splice in...
Mono Shock Spanner
Out Of Stock
Brand: ATC Heaven
This tool is vital for adjusting pre-load on mono shocks, use anything else and you are just asking for trouble. Get the right tool and get it done properly the first time. Suits ATC200X, ATC250R and ATC350X..
Showing 1 to 12 of 90 (8 Pages)