Your Cart

Please ensure you select your currency before checkout, currency link is at right top of page when viewed on desktop or in the "USD" link in sub menu when viewed on phone.

ATC70 78-85

ATC70 78-85

This section allows you to search for all parts relevant to Honda ATC70 78-85 models.

ATC70, 2nd generation introduced 1978, ends 1985, Features:

  • Model Code for 78-85 models "957".
  • 3 speed auto clutch transmission(78-81) 4 speed (82-85).
  • 16x8x7 low pressure tyres, SPWAMULASS (Water,Mud,Land,Sand,Snow).
  • Tyre pressure 0.2 kg/cm2 (3.0 PSI ).
  • Length 1300mm, width 800mm, Height 785mm, Weight 74kg.
  • Engine bore 47mm, Stoke 41.4mm, CR 7.5:1 Displacement 72cc.
  • Carb Keihin PB38A to 83, PC38A 84-85, main jet 58.
  • Engine number located below starter and behind gear change shaft.
  • Frame number located on steering head stock left side.
  • Engine Oil capacity .8 ltr.
  • Fuel tank capacity 4.0ltr, 3.2ltr main and .8ltr reserve.
  • Point gap 0.3 - 0.4 mm (12 to 16 thou).
  • Plug gap 0.6 - 0.7 mm (24 to 28 thou).
  • Plug NGK C7HS.
  • Valve clearance (cold) 0.05mm.

Brand: Honda
Here is the brake arm spring that serves to retract the brake shoes after application.We had these remade in stainless steel so they will never rust and be a perfect compliment to you restoration.Suits ATC70 78-85..
Need a new air box for your ATC70, here is a reproduction air box that fits the bill, It is exact in almost every way however the mount brackets are different so you will need to do some tweaking, Make some new brackets, use rubber bands or chewing gum, its up to you.Comes complete with new filter, ..
These factory second Step Guards are perfect if you just want a cheap replacement, one side has the outer loop welded in the wrong spot, you can repair this and re-weld or just run as isOriginal part number 50610-957-000, 50620-957-000..
Brand: Wide Open
Replacement rear sprocket to suit all model ATC70s. 36 tooth count. Std Gearing for 82-85 models..
Chain Tensioner ATC70 78-85
New -35 %
Brand: ATC Heaven
Here is a repro chain tensioner to suit std model ATC70This item is long discontinued from Honda but now available exclusively from ATC Heaven.Features rugged construction and smooth operating made in Japan roller bearing. Suits ATC70 78-85..
us$65.00 us$99.50
Brand: ATC Heaven
Fork Plate Bolt, this item fastens the top fork plate to the fork legs. Custom style bolt, chrome plated for extra Bling!Suits ATC70 73-85, ATC110 79-80, ATC185 '80...
Correct Air Box Hose clamp used to secure air box hose to carb inlet flangeSuits ATC70 73-85, Z50 76-81..
Tool Bar Holder Rubber Mount, this is the rubber mount that holds the spark plug tool in place under the seat on ATC70 modelsSuits ATC70 73-85..
This is the chromed nut that secures the cylinder head coverReplace those ugly mangled or corroded dome nuts with these shiny new replacement. After all who doesn't like shiny nuts.ATC70 models originally were fitted with 3 dome nuts and 1 hex nut but no reason you cant fit a new set of 4.Sold in pa..
This is a replacement hand brake cable to suit ATC70 models from 78-85. Listed for all second generation model ATC70s. good for use when using hi rise handlebarsextended 75mm (3")  length..
Get this replacement seat cover for your torn or cracked original. Plain design no pleats. Blue Vinyl, has "70" on sides and "HONDA" on rearOnce moisture is allowed to enter the foam the steel pan will start to rust. Make sure you replace the cover before this starts to happen. Suits ATC70 78 - 85..
Brand: ATC Heaven
Here is a great item to repair or rebuild your existing wiring harness.Coloured cable comes in most popular styles, just pick your colour from drop down box. Cable is 13' long and rated at 14 amps, made in Japan just like your bike..
Showing 1 to 12 of 203 (17 Pages)