ATC70 73-74

This section allows you to search for all parts relevant to Honda ATC70 73-74 models.
ATC70, 1st generation introduced 1973, ends 1974, Features:
- Model Code for 73-74 models "937".
- 3 speed auto clutch transmission.
- 16x8x7 low pressure tyres, SPWAMULASS (Water,Mud,Land,Sand,Snow).
- Tyre pressure 0.2 kg/cm2 (3.0 PSI )circ 50"-52" @3psi.
- Length 1300mm, width 800mm, Height 785mm, Weight 74kg.
- Engine Bore 47mm, Stoke 41.4mm, CR 7.5:1 Displacement 72cc.
- Carb Keihin 695A, main jet #60, slow #35.
- Engine number located below starter and behind gear change shaft.
- Frame number located on steering head stock left side.
- Engine Oil capacity .8 ltr.
- Fuel tank capacity 2.5ltr. (2.0ltr main, .5ltr reserve).
- Point gap 0.3 - 0.4 mm (12 to 16 thou).
- Plug gap 0.6 - 0.7 mm (24 to 28 thou).
- Plug NGK C7HS.
- Valve clearance (cold) 0.05mm.
Brand: ATC Heaven
Nice repro Spark Arrestor for your ATC70, This part can be fitted to any 73-74 model with OE style pipe Suits ATC70 73-74..
us$49.00
Brand: ATC Heaven
Nice repro heat shield for your ATC70, This part can be fitted to any 73-74 model with OE style pipe, mounts with hose clamps and has brakes welded to inside of shield Suits ATC70 73-74..
us$49.00
Brand: ATC Heaven
At last we can offer this rare and highly sought after item. This rear frame cover will replace your old damaged off missing cover perfectly This item is made from thicker steel to the original and fits perfectly.Suits ATC70 73..
us$95.00 us$140.00
Been searching for a new grab bar for your late ATC110 and ATC125MSearch no more. We have just received the first shipment of remade bars for these models. Don't get gouged buying a used grab bar, these are 100% new and 20% heavier steel than OEThis item has reflector mounts for European modelsSuits..
us$150.00 us$190.00
Been searching for a new grab bar for your late ATC110 and ATC125MSearch no more. We have just received the first shipment of remade bars for these models. Don't get gouged buying a used grab bar, these are 100% new and 20% heavier steel than OEWe also offer this item with reflector mounts for Europ..
us$125.00 us$165.00
Brand: Honda
Here is the brake arm spring that serves to retract the brake shoes after application.We had these remade in stainless steel so they will never rust and be a perfect compliment to you restoration.Suits ATC70 73-74Note: image shown is of 78-85 spring which is much the same but works in opposite direc..
us$11.90
Need a new air box for your ATC70, here is a reproduction air box that fits the bill, It is exact in almost every way however the mount brackets are different so you will need to do some tweaking, Make some new brackets, use rubber bands or chewing gum, its up to you.Comes complete with new filter, ..
us$65.00
Brand: Wide Open
Replacement rear sprocket to suit all model ATC70s. 36 tooth count. Std Gearing for 82-85 models..
us$42.00
Brand: ATC Heaven
Fork Plate Bolt, this item fastens the top fork plate to the fork legs. Custom style bolt, chrome plated for extra Bling!Suits ATC70 73-85, ATC110 79-80, ATC185 '80...
us$6.95
Correct Air Box Hose clamp used to secure air box hose to carb inlet flangeSuits ATC70 73-85, Z50 76-81..
us$13.50
This is the fuel filter brass screen located behind the filter inspection cap.Suits ATC70 73-74, ATC90 all,Also suits CT70 72-76, CT90 69-75, ST90 73-75...
us$13.50
This is the correct M6 special Sealing washer that secures the cylinder head on ATC70 models. It performs 2 functions in spreading the load from torqued down cylinder stud, and providing sealing on the oil feed studSuits ATC70 models 73-74, 1 required per bike..
us$3.20