Hardware
Hot
Brand: ATC Heaven
Foot Peg Rubber retaining bolt. This 10 x 20mm bolt is the correct Honda part with proper markings used in early ATC70 models. Suits ATC70 73-85, ATC90 all, ATC110 and ATC125M..
us$2.40
Brand: ATC Heaven
Got a worn friction plate on your ATC70, this is bad as it can cause the pawls to stay engaged and damage the starter cage. Up to now it was either find a good used one or try and repair your old one. Now you have a better choice. We had these remade from a NOS sample. Simply replace and forget. Rep..
us$35.50
Brand: ATC Heaven
This is the friction plate that helps the starter pawls to engage the starter pulley. After continued use the plate can become worn and not allow the pawls to fully engage. Replace your worn friction plate with this part. Fits ATC90 all, ATC110 79-85, ATC185/S 80-83, ATC200 81-83, ATC200E 82-83, ATC..
us$12.80
Brand: ATC Heaven
This is the 10mm nut that secures the flywheel to the crankshaft, may become damaged when removed with the incorrect spanners. Make sure you replace this item if in any doubt as extensive damage can be caused if it fails in service. Suits ATC70 73-85Also suits C70M 70-71, CA100 61-62, CA110 62-69, C..
us$3.75
Brand: ATC Heaven
This is the screw that fastens the float bowl to the carb body on ATC70 models and possibly others. Being such a small item it is easily lost or damaged when removed. This is the correct OE Honda replacement. Suits ATC70 73-85, ATC90 70-78...
us$1.45
Brand: ATC Heaven
Got a broken or missing exhaust stud on your ATC185 or 200. Replace it with this correct OE Honda stud. Being Honda means they are exactly the right dimensions and tensile strength. Suits ATC185/S 80-83, ATC200/E 81-83, ATC200ES '84, ATCX200X 83-85, ATC200M '84, ATC200S 84-85..
us$3.50
Hot
Brand: ATC Heaven
Consider replacing the exhaust collars on your ATC70 as part of regular maintenance. The collars are prone to corrosion and if left unchecked can cause the exhaust system to become permanently siezed to the cylinder head.In the worst case scenario, the collars can actually crack the cylinder head re..
us$4.95
Brand: ATC Heaven
This is the "D" washer that goes under the circlip to hold the friction plate down on ATC pull starters. Does an important job in allowing the friction plate to correctly throw the starter pawls. Replace this with a standard washer and you are just looking for trouble. Suits ATC90 ATC110 ATC185/S AT..
us$2.95
Brand: ATC Heaven
The drain plug washer is a service item and should be replaced at a regular intervalMade from soft aluminium its job is to compress and provide a seal between the drain plug flange and the crankcase. If this part is not replaced you risk stripping out the crankcase thread when overtightening the dra..
us$1.80
Brand: ATC Heaven
The Drain Plug is subject to damage from coming in to contact with solid objects and dubious mechanics. This drain plug is 12mm thread. Suits ATC70 73-85, ATC90 70-78, ATC110 79-85, ATC125M 84-87, ATC185S '83, ATC200 82-83, ATC200E 82-83, ATC200M 84-85, ATC200S 84-86, ATC200X 86-87, ATC250ES 85-87, ..
us$5.60
Brand: ATC Heaven
The chain tensioner access bolt washer should be replaced during service. Failure to replace this part could lead to oil leaks or dirt and grit entering the engine. If this part is not replaced you risk stripping out the crankcase thread when overtightening the tensioner bolt in an effort to stop oi..
us$3.95
Brand: ATC Heaven
The chain tensioner bolt is the bolt on the underside of the engine.Sometimes confused with the drain plug this bolt allows access to the cam chain tensioner. Although this bolt rarely wears out it is sometimes lost during disassembly and should be replaced with the correct item. Suits ATC70 73-85, ..
us$7.20