Fuel line clips. this item is fastened to the engine case and retains the fuel overflow line. Often not replaced when engine is overhauled it forms an important function in securing the overflow hose.Suits ATC70 73-85, TRX70 86-87, ATC110 79-83 ATC250R '86..
This is the screw that fastens the float bowl to the carb body on ATC70 models and possibly others. Being such a small item it is easily lost or damaged when removed. This is the correct OE Honda replacement. Suits ATC70 73-85, ATC90 70-78...
Front axle collar. This item locates the front axle within the front forks. If this item is worn or missing damage can occur to your front forks and axle. Suits ATC90 70-78, ATC110 79-83, ATC185/S 80-82, ATC200 81-82, ATC200E '82. Sold Per Pair..
Got a broken or missing exhaust stud on your ATC185 or 200. Replace it with this correct OE Honda stud. Being Honda means they are exactly the right dimensions and tensile strength. Suits ATC185/S 80-83, ATC200/E 81-83, ATC200ES '84, ATCX200X 83-85, ATC200M '84, ATC200S 84-85..
Replace your missing or stripped exhaust studs in your ATC70 with these correct OE Honda studs. Being Honda means they are exactly the right dimensions and tensile strength. Suits ATC70 73-85, ATC125M 84-85, TRX70 86-87, TRX90 93-04Also suits TRX90EX 07-08, TRX90X 09, TRX125 85-86, C70 72-73 & 8..
Consider replacing the exhaust collars on your ATC70 as part of regular maintenance. The collars are prone to corrosion and if left unchecked can cause the exhaust system to become permanently siezed to the cylinder head.In the worst case scenario, the collars can actually crack the cylinder head re..
This is the "D" washer that goes under the circlip to hold the friction plate down on ATC pull starters. Does an important job in allowing the friction plate to correctly throw the starter pawls. Replace this with a standard washer and you are just looking for trouble. Suits ATC90 ATC110 ATC185/S AT..
Replace your old cracked or discoloured dip stick with this new item. Nothing spoils a restoration more than recycling old parts that really should be replaced. Just fit a new "O" Ring, screw in and your good to go. Suits ATC70 73-85, TRX70 86-87..
The drain plug washer is a service item and should be replaced at a regular intervalMade from soft aluminium its job is to compress and provide a seal between the drain plug flange and the crankcase. If this part is not replaced you risk stripping out the crankcase thread when overtightening the dra..
The Drain Plug is subject to damage from coming in to contact with solid objects and dubious mechanics. This drain plug is 12mm thread. Suits ATC70 73-85, ATC90 70-78, ATC110 79-85, ATC125M 84-87, ATC185S '83, ATC200 82-83, ATC200E 82-83, ATC200M 84-85, ATC200S 84-86, ATC200X 86-87, ATC250ES 85-87, ..
The chain tensioner access bolt washer should be replaced during service. Failure to replace this part could lead to oil leaks or dirt and grit entering the engine. If this part is not replaced you risk stripping out the crankcase thread when overtightening the tensioner bolt in an effort to stop oi..