Anyone who has ever tried to set the points gap on an ATC70 will know the job is made infinetely harder when the points screw head is damaged. For some reason this is an odd size that never seems to be lurking in your jar of bolts. We suggest you grab a couple of these and be ready for you next enco..
This is the clip used to secure the overflow line from the carb. Make sure you replace this when renewing your fuel lines. Suits ATC70 73-85, ATC90 70-78, ATC110 79-85, ATC125M 84-87, ATC200ES '84, ATC200M '85, ATC250ES 85-87, ATC250R 81-86, ATC250SX 85-87, ATC350X 85-86Also suits NX50M 81-82, C70 7..
Neutral Indicator is located on the left side of the engine behind the recoil starter. Most often lost during disassembly but can also become cracked with age. Suits ATC70 78-85, ATC90 70-78, ATC110 79-85, ATC125M 84-85, ATC185/s 80-83, ATC200 81-83, ATC200E/ES 82-84, ATC200M/S 84-86, TRX70 86-87, T..
Got a broken or missing inlet manifold stud on your ATC185 or 200. Replace it with this correct OE Honda stud. Being Honda means they are exactly the right dimensions and tensile strength. Suits ATC185/S 80-83-85, ATC200/E 81-83NOTE, this is the inlet manifold stud, not to be confused with the exhau..
The carb on FL250 models is mounted on a rubber based inlet manifold. After time the rubber can become cracked allowing air to bypass into the cylinderThis translates to rough idle and overly lean burn, if left uncorrected can lead to engine seizure. Get this OE manifold for your FL, we suggest you ..
This is the washer that fits under the guide roller bolt.It is essential to seal the cylinder head thread and must be replaced when fitting the guide roller bolt.Suits ATC70 73-85, ATC90 all, ATC110 all, ATC125M 84-85, TRX70 86-87, TRX90 93-05Also suits TRX90EX 07-09, TRX125 85-86, Z50 68078, Z50R 7..
The guide roller bolt locates the guide roller within the cylinder. If you ever wonder what the little hex head bolt was for that goes on the left side of the cylinder now you know. Don't remove it out of curiosity. Although this bolt rarely wears out it is sometimes lost during disassembly and shou..
Replace your missing or worn gear change rubber with this OE itemAfter years of abuse the original rubber can become worn and tornNo need to put up with that, just fit this new rubber and you're away. Suits ATC70 all, ATC90 all, ATC110 79-81, ATC185 80-81, ATC200 81, ATC200X 83-87, ATC250R 81-86, AT..
This is the washer that goes under the flywheel nut on ATC70 models.It is thicker than standard washers and has a small OD to allow it to fit in the recess of the flywheel. Make sure you replace this washer if lost or damaged. Suits ATC70 73-85, TRX70 86-87Also suits MR50 74-75, NA50 79-80, NC50 77-..
This is the screw that fastens the fuel tap to the float bowl on ATC70 models and possibly others. Being such a small item it is easily lost or damaged when removed. This is the correct OE Honda replacement. Suits ATC70 73-85Also suits PC50 69-70 QA50 70-72, C70 72-73, C70M 70-71, CT70 69-77, CT90 6..
This is the 10mm nut that secures the flywheel to the crankshaft, may become damaged when removed with the incorrect spanners. Make sure you replace this item if in any doubt as extensive damage can be caused if it fails in service. Suits ATC70 73-85Also suits C70M 70-71, CA100 61-62, CA110 62-69, C..
The fuel line clip on the ATC70 is most often distorted, stretched or just missing. To restore originality to you ATC be sure to include these genuine Honda items. Suits ATC70 all, ATC90 all, ATC110 all, ATC125M 84-85, ATC185S 83, ATC200/E 82-83, ATC200M 84, ATC250R 81-82/85-86, ATC350X all, TRX70 a..