ATC70 78-85
Out Of Stock
Get this replacement seat cover for your torn or cracked original. Pleated design just like original Once moisture is allowed to enter the foam the steel pan will start to rust. Make sure you replace the cover before this starts to happen. Suits ATC70 78 - 85..
us$63.00
Front axle nut with flange 14mm. The axle nut is subject to abuse and damage and should be replaced as required.Hex type castle nut suits ATC70 models from 78-85. Also suits ATC250R 81-82 Front Wheel and Swingarm. ATC200E and 200ES 82-84, ..
us$13.95
These mud flaps although not standard issue on 2nd gen ATC70s were offered as an accessory.Now discontinued and extremely hard to find we had these remade from a NOS sample.They are interchangeable so fit either left or right side. This means if you only need one you are not forced to buy a pair.We ..
us$35.00
Hot
Brand: ATC Heaven
Chain sliders are a part that just wears out and need to be replaced. But if you considered replacing this item you may have found they are now discontinued.To fix this we had these re-made, same as OE and may possibly outlast your ATC when fitted. Just fit and forget. Suits ATC70 from 78-85..
us$19.90
Brand: ATC Heaven
Who would have thought such a small item can cause so much trouble. A couple of things that lead to the demise of this part is firstly, shearing off in service, and secondly, dissapearing into thin air once the flywheel is removed. If you don't need one now, chances are you will sometime in the futu..
us$5.95
Hot
Brand: Honda
Thumb Throttle Screw, special bright plated screw as fitted to thumb throttle casing on all model ATC70s, ATC110, ATC125M, ATC185/S, ATC200/E/ES/M/S.Suits ATC70 73-85, ATC110 79-85, ATC125M 83-85, ATC185/S 80-83, ATC200 80-83, ATC200E 83-83, ATC200ES 84, ATC200M 84-85 ATC200S. Screw is 5mm x 22mm...
us$3.60
Brand: Honda
This is the rear mount rubber that secures the tank to the frame on ATC70 models from 78-85. This is a necessary item which allows proper alignment and retention on the tank. Suits ATC70 78-85Also suits Z50A 72-78, Z50R 79-99...
us$7.20
Hot
Brand: Honda
This is the rubber mount that secures the front of the tank to the frame on ATC70 models from 78 to 85. Replace those worn or missing mount rubbers and restore proper alignment to your ATC. Suits ATC70 78-85Also suits Z50R 79-87, CL90 67-69, S90 64-69, TRX125 '86...
us$6.00
Brand: ATC Heaven
The Tappet cap allows access to the rocker arm adjustment screw when setting valve clearance. Sometimes damaged during removal usually when using the incorrect spanner. Suits ATC70 allAlso suits Z50A all, Z50R 79-99, C70 all, C70M 70-71, CT70 69-71 & 76-94, CT70H 70-73, XL70 74-76,..
us$10.56
Hot
Brand: ATC Heaven
This is the step washer that goes between the bolt and plastic fender which locates the plastic. Often lost or rusted this item plays an important role in allowing the mount bolt to be tightened down without damaging the plastic. Replace these washers when needed to avoid damage to expensive fenders..
us$3.90
Hot
Brand: ATC Heaven
This is the set spring fitted to ATC70 modelsWithout this item the starter ratchets may not return properly and cause damage to the pull starter and starter cage. Suits ATC70 73-85..
us$11.90
Hot
Brand: ATC Heaven
This is the starter ratchet fitted to the ATC70 starters. These items rarely wear out but somehow seem to dissapear for no real reason. If you are having problems with these jumping out of the starter spool check to see if you spool ramps are worn as these ratchets are hard steel and almost never we..
us$11.50