Menu
Your Cart

NOTE :

Please ensure you select your currency before checkout, currency link is at right top of page when viewed on desktop or in the "USD" link in sub menu when viewed on phone.

ATC70 73-74

ATC70 73-74

This section allows you to search for all parts relevant to Honda ATC70 73-74 models.

ATC70, 1st generation introduced 1973, ends 1974, Features:

  • Model Code for 73-74 models "937".
  • 3 speed auto clutch transmission.
  • 16x8x7 low pressure tyres, SPWAMULASS (Water,Mud,Land,Sand,Snow).
  • Tyre pressure 0.2 kg/cm2 (3.0 PSI )circ 50"-52" @3psi.
  • Length 1300mm, width 800mm, Height 785mm, Weight 74kg.
  • Engine Bore 47mm, Stoke 41.4mm, CR 7.5:1 Displacement 72cc.
  • Carb Keihin 695A, main jet #60, slow #35.
  • Engine number located below starter and behind gear change shaft.
  • Frame number located on steering head stock left side.
  • Engine Oil capacity .8 ltr.
  • Fuel tank capacity 2.5ltr. (2.0ltr main, .5ltr reserve).
  • Point gap 0.3 - 0.4 mm (12 to 16 thou).
  • Plug gap 0.6 - 0.7 mm (24 to 28 thou).
  • Plug NGK C7HS.
  • Valve clearance (cold) 0.05mm.



Maybe you only need the float bowl gasket and not the complete set. Here is the answer, we sell the float bowl gasket on its own just to get you out of trouble. Suits ATC70 73-74, ATC90 70-78Also suits CT70 69-77, CT90 69-77, ST90 73-75..
us$6.50
Carb Rebuild Kit ATC70 73-74
Out Of Stock
Got a sick carb on your First generation ATC70, chances are its time for a rebuild.If not, this will keep you occupied for a couple of hours anyway. Contains all the gaskets, "O" Rings needles and Jets required to rebuild your carb. Note: this kit is the closest we could find for the 73-74 ATC70, yo..
us$31.00
This kit contains all the gaskets and "O" Rings required to service your 73-74 ATC70 Carb.Also contains the filter screen components and includes the brass screen which is unavailable as a seperate item. Suits ATC70 73-74, ATC90 all, Also suits CT70 72-76, CT90 69-75, ST90 73-75...
us$35.50
Rear Tank mount rubber, also serves as an anchor point for the front of the seat. This rubber is necessary for correct seat and tank alignment and retention. Suits ATC70 73-74Also suits CL70 70-73, SL70 71-73, XL70 74-76, XL75 77-78, XR75 73-78, SL90 '69,..
us$11.15
Steering Stem Bearing ATC70/90/110 | ATC125M |  ATC185/S |  ATC200/E/ES | ATC200M/S
Hot Out Of Stock
Brand: ATC Heaven
If you are in the throes of restoring your ATC, or just going about yearly maintenance you should consider replacing the steering stem bearings. The Original design bearings work OK but these tapered caged bearings are a whole lot better. Improve steering efficiency and make your steering feel like ..
us$59.00
Here is a nice replacement handlebar for your ATC70. Bars have been reproduced using a NOS bar sample. Heavy steel wall construction and use of high carbon steel make these a perfect replacement for you old rusted or bent bars. Bars are finished with high lustre chrome plating and will add bling to ..
us$95.00
Grab Bar ATC70 73-74
Out Of Stock
Been searching for a new grab bar for your early K0 -KI ATC70? Search no more. We have just received the first shipment of remade bars for these models. These are hard to find and stock will go quick. Cheaper than getting your old Bar re-chromed. Suits ATC70 73-74..
us$85.00
Brand: Wide Open
Chain tensioners are an item that is frequently damaged or worn out on the ATC70-90These units when available from Honda sold for over $100 Suits ATC70 73-74, ATC90 70-78, ATC110 79-82..
us$79.00
Brand: ATC Heaven
Need a new exhaust for your classic '73 ATC70??.Up til now it was either rebuild your old system or try and find a good used unit, neither option being very appealing.We now we can offer this brand new reproduction, probably cheaper than a used or repaired system. Comes complete with heat shield and..
us$220.00
Brand: ATC Heaven
This valve set contains one inlet and one exhaust valve to service your cylinder head. Quite often valves can be bent or worn leading to poor performance and difficult starting. Consider replacing your valve set now. Quality valves made in Japan. Suits ATC70 73-85, TRX70 86-87..
us$48.00
Valve Collet ATC70 | ATC90 | ATC110
Out Of Stock
Brand: ATC Heaven
This is the collet that retains the valve spring to the valve. Although this part rarely wears out it quite often dissapears into thin air during valve dissassembly. Make sure you have a couple of these spare in your toolbox as it will save you a lot of frustrating searching at a critical time. Suit..
us$6.45
Brand: ATC Heaven
Valve stem seals should be replaced whenever servicing the cylinder head. We now offer these seal as a seperate item. Great for when your gasket set does not include these seals or when they have been damaged or misplaced. Sold per each. Suits ATC70 73-85, TRX70 86-87, ATC90 73-78, ATC110 79-85Also ..
us$2.50
Showing 121 to 132 of 191 (16 Pages)