Anodised aluminium cable adjuster, suits most models with smaller 8mm cable. Alloy construction makes these light weight and resistant to corrosion. Great replacement for chewed out or rusted adjusters..
This is a replacement Hand Brake Lever for right side front brake application.Fits TRX200/D 84 and 90-96, TRX200SX 86-88, TRX250 RECON 97-05, TRX300/FW 88-00, TRX300EX 99-03, TRX350/D 86-89, TRX350 RANCHER 00-05, TRX400EX 99-05, TRX400FW, TRX450S/ES 95-04, TRX450R 04-05..
If you are experiencing problems with hard shifts and gear lever that won't return to centre could be your gear selector shaft is bent.This is a common problem on the ATC70 and only takes an impact with a solid object to bend this shaft. Additionally the spline can become stripped due to poorly fitt..
Replace that worn or binding cable now before it gets you into trouble. Running a worn cable is dangerous and should be rectified before operating your ATC. This Cable suits ATC250ES 86-87, TRX250 Late 85 - 87...
Get this nice reproduction handbrake cable to make your brakes work again, after time handbrake cables can become siezed and will not allow your brakes to function. or even worse they jam on holding the brakes engaged which robs power and causes advanced brake wear. This remade item will replace you..
Be sure and replace your throttle cable at the first sign of binding or resistance. This cable has no carb cap so can work with aftermarket carbsSuits ATC250R 86 ModelsNote: Image shown is not correct for this part..