If you own one of the earlier ATC110s then you will immediately appreciate this item Once you remove your seat for recovering, 9 times out of 10 you will find the seat pan is rusted beyond repair. Just get one of these quality reproduction pans made from rust free fibreglass and problem solved. Requires drilling and new bolts.

This seat pan will replace your old tired, rusted out or missing pan. Made from hand laid fibreglass, will never rust and might even outlast your ATC, cover can be fixed using contact cement and rivets. Suits ATC185 80, ATC200 81-83.

As with all the other pre-83 ATCs the ATC185S is fitted with a steel seat pan. Its only a matter of time before the old steel pan rusts out. However, with the addition of this quality reproduction pan you will never suffer this problem again. Just fit and forget.

Special order, please allow up to 4 weeks

The seat Pan on the earlier ATC200E models are prone to early retirement due to "rust out". This will never happen again once you fit one of these reproduction fibreglass seat pans. Just glue on a new cover and your good to go.

Suits ATC200E & ATC200ES, possibly other applications using 3 Peg mount. Temp out of stock

This reproduction seat cover hold-down plate will replace your original units perfectly. Made from the correct gauge steel and complete with 5mm studs & nuts it is direct replacement for the original. Consider replacing these when recovering the seat as the originals will almost certainly be rusted away or missing.

2 required per bike

This reproduction seat cover hold-down plate will replace your original units perfectly. Made from the correct gauge steel and complete with 5mm studs & nuts it is direct replacement for the original. Consider replacing these when recovering the seat as the originals will almost certainly be rusted away or missing.

2 required per bike

Ever fitted a new seat cover to your ATC but realised something is missing. Could be the factory applied stencil. This stencil set will allow you to reproduce the factory markings on the side of the seat of your ATC70. Although originally only used on 85 models this stencil can be used on any year.

Be sure to add the finishing touches to your ATC restoration, one easy way is to use these stencils to re-create the factory applied model name to the side of your seat. Just apply these stencils, add a coat of white vinyl spray and peel off for a perfect result. Suits ATC200X 85 models.

Just recovered your old seat, something missing?? If you want to make your seat look like it did from the factory you will need these stencils. Just apply to the seat side, spray over with white vinyl spray and peel off for a perfect result. Suits ATC250R 85.

Got a new seat cover for your ATC, then you will most probably be wanting to add the factory model emblem. Easy enough with this stencil. Just apply to a clean degreased seat cover, spray on the desired colour vinyl spay and in a matter of minutes you will have a reproduction of the original design.